The Display and View Controls are on the right side of the FLOWCast Toolbar. These controls give you great flexibility in what data is displayed and how the data is viewed during a simulation.
The Display Control allows you to switch between eleven different types of data, as follows:
Tempera. The current temperature at each point
Fill Temp The temperature at that location when the node FIRST filled
Fill Time The time at that location when the node FIRST filled
Velocity The metal velocity at each point
X velocity The velocity component in the X direction
Y velocity The velocity component in the Y direction
Z velocity The velocity component in the Z direction
X coord. The X position in the model
Y coord. The Y position in the model
Z coord. The Z position in the model
Pressure The current pressure at each point
The default data displayed is Temperature. Examples of each of these data types are shown in the following figures.
Fill Temp Display
Fill Time Display