UNIT 8: The Settings Menu

 

This menu is used to control the color, thickness and number of pathlines displayed when using the Display Particle Tracks Group function. This function is toggled on or off using the Pathlines Tab. It also controls the Filling Speedup parameter. Options available are:

 

 

These options will be explained in the rest of this unit.

 

Show mold parts

 

In most cases you only look at the metal portion of the model, that is, the casting, gating and risering. There may be times, however, where you would also like to look at items in the mold, such as chills, sleeves, etc. Show mold parts allows you to toggle the display of these extra pieces on and off. The two figures below show a model with mold parts off and with mold parts on. With mold parts on you can see the riser sleeves.

 

          

 

Symmetry planes

 

A common method of speeding up simulations is to use one or more planes of symmetry, when the model has mirror images. For example, the model below has two planes of symmetry which are represented by the grayed-out areas:

 

 

In this particular case, using planes of symmetry can reduce the model size to one-quarter, without sacrificing simulation quality at all. This also means that results come four times faster!

 

When a SOLIDCast model is meshed using planes of symmetry, FLOWCast has the ability to display the filling process on the entire model, by mirroring those results on the display. The Symmetry planes function is a toggle switch, which controls whether the display data is mirrored or not. The default state is Auto. That is, the data is automatically displayed on the full model, so that the complete model fills. If Symmetry planes are turned off, then the data will be displayed only on the meshed portion of the model, which may be only one half or one quarter of the full model.

 

The two figures below show the effect of using the Auto and Off settings for the Symmetry planes function:

 

          

 

 

There are three functions that control the display quality of metal flow pathlines. They are described here.

 

Pathlines color

 

Select Settings…Pathlines color, to choose the color of the flow lines from the following palette: